Xhorse VVDI PROG + VVDI2 is able to read & decrypt 2016 Volkswagen Polo MQB locked D70F35xx immo data on bench. Need to activate VAG MQB48 License and disassemble MQB module from vehicle for pin lifting.

Following are the quick steps.

Step1. Read Data via VVDI PROG

Lift FVDD PIN from PCB according wiring diagram

Connect MQB board to VVDI PROG for reading.

Save the immo data file.

Step2. Decrypt Locked Data via VVDI2

Connect MQB board to VVDI2.

VW >> Key Learn >> MQB platform instrument immobilizer >> instrument with locked NEC35xx(MQB48, VDO/JCI) >> Load file >> Decode immodata >> Yes >> Selected immo data file read by VVDI PROG

Server calculating, please wait…

Press “OK” to save immo data file.

As we can see, immo data like VIN, CS, PIN, MAC & keys have been read out. It’s unlocked now and can be used for key adding or all keys lost.

www.vvdishop.com

 Problem:

I was trying to clone a Ford key because their key was busted up so they can get it in and do a couple of new keys. But for some reason my xhorse vvdi key tool max wouldn’t clone them it’s done it before I just updated is it something in the new updates that should be fixed. This was on a 2008 F-150 You can see the information I pulled and The answer I got from the machine.

Solution:

83 chip ford not possible to clone.

80bit chip, This specific key can’t be cloned. Has to be generated

You can generate a 83 chip ford with vvdi super chip with vvdi and go to the car and program it with tool via obd2 is a simple process it won’t ask for pincode just go open ignition with new unprogramed key and add a key.

 Here are the tips to cut shoulder stop keys on the Xhorse Condor or Dolphin key cutting machines.

Definitely easier to use it than to eyeball it. We are going to show you how to use the shoulder stop with it.

The shoulder stop has a little lip on it and that little lip actually fits into that groove and that actually acts as your shoulder stop.

We are doing a duplication for the bike.
Let’s grab the vvdi key tool max. We are already connected.
Go to All Keys Lost->Yamaha, put code A7354 and you need the internet to actually use the code search on it.

Pulls it up tells us M1 clamp shoulder align and 2 4 3 1 3 1 4 so let’s the correct bitting on there.

Our jaw clamped in there, grab the shoulder stop here.
Fit it into a little groove here, you just simply slide the key and push the shoulder stop up.

You just push the key until you know hit the shoulder stop.
Clamp it in it just takes the guesswork out of it here you don’t have to eyeball it.

basically, you’re going to do it again as you can see so you got your shoulder stop in the groove here and you just slide the key until it until it hits the shoulder stop and then just clamp it
in and then i’m going to put this back on my little magnet up here tightens my grub screw and these magnets on top of the machine work really really well.

Then now we’re all ready to cut the key here. Just go ahead and uh hit cutting key. The machine will do its thing here.

We got the key, we’ll just loosen the grub screw here pull the key out and turn on the bike.

The key works perfectly.

www.vvdishop.com

 Xhorse vvdi2 key programmer was released to V7.3.2 on April 2022.

***        2023-04-18
***        Require firmware V7.3.0
=====        VAG V7.3.2                        =====
1. Support Immo4-NEC35xx dashboard which not support OBD(All key lost and new VDO)- require MQB48-NEC35xx(Lock) license
2. Add key learn for Brazil NEC+95320(Marelli)(Menu->Key learn->Key learn->VW NEC95320(Marelli)Brazil)
3. Improvement for NEC+24C64: Support more type in Brazil
4. Improvement for OBD read BCM2 immo data
5. Bugfix

=====        BMW V7.3.2                        =====
1. Support unlock more BDC versions directly without program to other version
2. Bugfix

=====        Porsche V7.3.2                        =====
1. Bugfix

=====        PSA V7.3.2                        =====
1. Bugfix

=====        Transponder Programmer V7.3.2        =====
1. Bugfix

=====        Copy 48 (96 bits) V7.3.2                =====
1. Bugfix

=====        J2534 V7.3.2                        =====
1. Bugfix

=====        Online Upate Tool V7.3.2                =====
1. Bugfix

=====        Quick Start V7.3.2                        =====
1. Bugfix

Free download vvdi2 software V7.3.2
http://dl.xhorse.com/product/vvdi2/software/VVDI2-InstallerV732_V2.exe
http://dl.xhorse.com/product/vvdi2/software/VVDI2-InstallerV732.exe

 New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools.

Tested VVDI Prog and VVDI key tool plus read MQB dashboard. Both devices have bought the new VAG MQB license. Without you cannot read the data on dashboard.

and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading.

There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min.

email address: sync_data_calcu@qq.com 

I done already few with 100% success. Lifting pin not very dangerous.
They answered fast usually I communicate via wechat and there have take time.

Same place need to solder if use key tool plus. But key tool plus does not need 1k oom and no extra 12v as vvdi prog.
2019 build year Skoda Superb akl situation made successfully today.
same dashboard 160€ and they give you all data what need to make key.
Just force ignition on and read over obd information like on picture and send them. That dashboard just cannot read whit vvdiprog yet pay the 160 and get the job done, les then 3min. I get the immobdata and synchronization information and car out.

 Problem:

Toyota Rav4 2020 USA market 8A 312/314mhz tested 3 listed remotes don’t work on Xhorse xm28 and xm38.
Car accepts only the original key in the procedure.
Original key is batch no: 14FBC in Vvdi mini key tool app software doesn’t find that key. Any idea is welcome.

Solution:

Best option is the OEM key.

Xhorse xm38 works as well. Here is the tip.

Use this one, works great. All Rav4 work with xhorse.
You’ll find it under Lexus, or use the search function.

If the frequency is not the same as this option. You have to adjust the frequency after you program it.

Go to VVDI Remote Function->Smart key customization

 I’m already having a FCC key and gonna do add key for this 2023 Toyota Camry. What I would consider the easiest way is using Xhorse VVDI Remotes. As I can program the key no problem without any codes in 4 minutes.

What is required

VVDI Key Tool Plus

XKTO10EN Toyota Wired Remote

VVDI Super Chip XT27A66

Step1. Generate Remote

Plug circuit board into VVDI Key Tool Plus. You can do this with a Mini Key Tool in same way. Be noted to install a battery for it.

Remote program >> Search: HYQ12BGF >> Generate

Step2. Add Remote

Disconnect the circuit board, enter

Immo programming >> Toyota >> Select from model >> Camry >> 2010- >> Remote program(2013-) >> Start programming >> Remote adding

Switch ignition on, open driver door at the same time.

Please complete in 30s, you’ll hear the system beep after done:

Click LOCK & UNLOCK button for 4s, then click LOCK button for 1s.

(If no programmed, click LOCK & UNLOCK for 4s, after releasing click UNLOCK & LOCK meanwhile).

Step3. Transponder Clone

Insert working key into Key Tool Plus coil.

Transponder Clone>> Read Transponder >> Transponder Clone >> Start clone

Take out working key and put a VVDI Super Chip instead.

Transponder copy successfully.

Easy done!

www.vvdishop.com

 Problem:

I failed to generate Xhorse Audi 754j remote with both vvdi mini key tool and vvdi2. Error authorized remote failed. Any solution.

Solution:

You got the Chinese version 754j remote (see the plastic pack and PCB board). CN version remote cannot be generated by English devices.

Get latest version English remote here

https://www.vvdishop.com/wholesale/xhorse-vvdi-audi-754j-smart-key.html

 VVDISHOP.com here shares Xhorse vvdi prog pinouts to volvo s40 CEM module.

There are 2 types.

Type 1 pinout

Type 2 Pinout

Feedback:

I was able to read and write both processors eeprom & flash with vvdi prog by following pinouts on mcu. I used hooks to connect straight to legs. The new installed bcm works great with old keys and no error codes are current.