Problem:

I installed all the Xhorse VVDI BIMTool pro software but nothing is working and tool always says booting. Any solution?

Solution:

Update vvdi bim tool pro firmware to latest version via Xhorse upgrade kit.

Then try again.

 Question: Possible to program Toyota Sienna 2021 proximity smart key with xhorse vvdi key tool plus? P4 page is BABA.

Answer: Add key ok, no possible to program all keys lost.

For add key, generate Toyota XM38 remote under this option. Then program xm38 remote with key tool plus. Key tool plus will ask for rolling code which you have to obtain from 3rd party.

Users can customize key frequency and buttons after programming.

 Skoda Fabia 2019 new flip key was successfully added by xhorse vvdi key tool plus and aftermarket key with hu162 blade via OBD.

original remote number 6vo but used 5go.

Fabia is vdo unlocked.
If you have NEC35xx locked type not possible via OBD.
Read immo data and eeprom without problem.
Prepare dealer key and learn key with vvdi key tool plus pad.

It leanr key but both remotes stop working. You have to use odis online to properly learn keys with remotes. There is an issue with component protection on comfort module.
Remote can vanish you just re learn again then ok swap order of which key you learn first. You may have similar with keyless Passat.

 Where can i find pinouts to read bsi valeo psa with xhorse vvdi prog and which eeprom?

EEPROM:
912dg128A Motorola

Pinout to vvdi prog

 Problem:

I had a problem cutting Peugeot 207 HU83 key blade with new xhorse dolphin xp005l key cutting machine. Giving Error code 2 probes not detected.

Solution:

The clip key is in the wrong position.

Pay attention to the position of the clip key, not in the bottom groove.
If the key clip is in working position you will fail to cut key (usually get error code 2)

www.vvdishop.com

 Problem:

My Xhorse Dolphin XP008 manual key cutter cannot cut this type of blade. Any solution?

Solution:
Dolphin XP-008 is automatically tightened by this spring, the key blank is too thick and cut too hard.

Losen these two screws then tighten them again.

Try to cut key again.

If it does not work, remove this part and check if belt is loose.

www.vvdishop.com

 What’s the difference between Xhorse VVDI BEE key tool lite and vvdi mini key tool/key tool max?

Check the table comparison below:

VVDI BEE key tool is the lite version of mini key tool without remote clone and remote renew functions. But key tool lite price is very competitive, $55 free shipping.

Both tools require generating 10 universal remotes to activate ID48 96bit cloning license.

For remote coverage please check xhorse app.

 How-to: register and combine xhorse VVDI BEE key tool lite with Xhorse App.

Connect key tool lite with mobile phone via main test cable

Download and run Xhorse App

Go to KeyTool Lite interface

Press “Connect” icon

Start to Set

Send security code to your mobile phone

Press Skip

Press Combine Device

Combine device successfully.

Now your VVDI BE key tool lite is ready to use.

 How to program a key for a 2014 Volkswagen Golf using the Xhorse VVDI Key tool Plus programming tablet via OBD.

Select IMMO Prog->VW->Automactical diagnose vehicle

Key tool plus detected cluster type:  VDO/Continental NEC35XX MQB 2014- UDS

Select Key Adding automatic wizard

Follow 5 steps to program key
1. Read and save eeprom data
2. Read and save immo data, this data is used to generate dealer key and learn key
3. Reset the instrument, clear DTC and sync the instrument
4. Generate dealer key, generate normal dealer key OEM (online)
5. Learn key.

Press Start to Read eeprom data

Then read and save immo data

Reset instrument

Generate dealer key

Turn on ignition with working key, if car has keyless, insert key nearby the ignition coil

Select Prepare normal dealer key->Add key (have a normal working key)

Insert original key into key tool plus

Save sync data

Upload immo data to generate dealer key

Input a new key into vvdi key tool plus

Prepare dealer key success.

Perform step 5 learn key.

Input number of keys to be learnt: 2

All key must be learnt.

All keys successfully learned.

 Problem:

Volvo xc90 when i try to clone id48 96bit with xhorse vvdi mini key tool, i have this and can not read other 7. What is problem, server, tools or?

Solution:

Wait 1 minute each or disconnect battery terminal. Like VW Jetta, disconnect battery between reconnect and sniffer data acquisition 8 times.

You have to disconnect the battery each time.
After every read; ignition off, battery terminal off, wait 5 seconds, battery terminal on, ignition on.
Then it will work.

Read instructions on xhorse app.
If it’s Volvo model, each time can collect 1 set data, require disconnecting power to collect next set data.

Some people try turn the ignition off and On 8 times, without disconnecting battery, works ok as well.

Feedback:

i done I need to wait 2min new on each reading.