VVDISHOP.COM is rolling out a new godiag full protocol jumper cable set to replace the Benz EIS/EZS test cables for xhorse vvdi mb tool, vvdi key tool plus for EZS/EIS data reading.

The universal jumper cable set is much cheaper and easier to use than regular EIS/EZS cables.

Follow Benz EZS/EIS table connection pinouts to connect EIS with godiag jumper

Connection diagram example:

The advantages of Godiag jumper comparing Benz EIS/EZS cable set:

• 1. Cheaper, $29.99 only
• 2. Easier to use and connect
• 2. Multifunctional.

The godiag jumper can be used with vvdi2/vvdi bimtool to read VAG Audi engine ECU data and PIN on table as well.

Example: vvdi2 read Audi A6 Simos 6.3 ECU and PIN via Godiag jumper.

https://youtube.com/shorts/qXqKT9u9xXE

The jumper adapter can also be used as breakout tricore cable for mpps, kess v2, fgtech etc to read ECUs/TCUs no opening ECU.

 Can xhorse vvdi2 read ISN from a BMW MSD80 DME?  This is a frequently asked question by users.

Yes, it can.

Here’s the guide on reading MSD80 ISN with vvdi2.

Check msd80 vvdi2 wiring diagram

set up bench connection with vvdi2 and ecu, provide 13.5V power supply

Let’s go to BMW
Go to Key Learn function- ECU/CAS ISN-MSD80
Read ECU ISN

if you don’t want to mess with bmw, you gonna wait patiently

vvdi2 bmw reads the engine ISN and VIN, read full flashing completed.

Save data.

Change MSD80 VIN requires complete flashing. If vvdi2 will read complete flashing, it can change the vin.

https://www.vvdishop.com/service/read-bmw-msd80-isn-with-xhorse-vvdi2.html

 Xhorse VVDI Key Tool Plus Pad can detect ignition coil to confirm whether the vehicle is equipped with chip & immo system when all keys lost.

How to detect vehicle ignition coil for AKL?

1. Place VVDI Key Tool Plus coil close to ignition, enter into: Special function >> Ignition switch coil signal detection;
2. Use a programmed mechanical key to turn on/off ignition;
3. If Key Tool Plus Pad displays chip info with beeps, which means the vehicle is equipped;

If Key Tool Plus Pad has no any response, which means the vehicle is not equipped.

Other Purpose

1. This function can test ignition coil is work normally or not. To troubleshoot in case keys failed to start vehicle or unable to learn.

2. This function can also help to find the induction area on vehicle. Most smart remotes need to approach induction area for key programming. If don’t know where it is, keep Xhorse Key Tool Plus coil moving close to possible areas and push START button meanwhile. As soon as the tablet prompts, you’ve found it.

www.vvdishop.com

 Problem:

I am experiencing a problem it is impossible to update xhorse dolphin xp-005 key cutting machine. It asks me to connect to the PC but the software does not find the machine. Has anyone ever encountered this issue? Thank you

Solution:

Missing USB driver. Install USB driver.

Feedback: