Problem:

Failed to update xhorse vvdi key tool plus firmware, error download update file failed. Any solution?

Solution:

Network issue.

Change mobile wifi hotspot and update again.

 Problem:

Failed to update xhorse vvdi key tool max pro immo database, any solution?

Solution:

Change WiFi hotspot, update database again.

If still fails, do a factory reset and try again.

 Problem: My Xhorse Dolphin 2 is unable to remove M5 Clamp even when twisting the right red button for many times.

What’s wrong, any suggestions?

Solution

1. Rotate the black button to remove M5 clamp;
2. The reason why caused the issue is because M5 clamp is slipping and cannot hold the key properly. Try to tighten the clamp by turning to the opposite side of screw, and knock it hardly on the ground. This can fix the problem.

Technical Support

www.vvdishop.com

 User report:

Added key for 2019 Ford Everest by xhorse vvdi key tool plus successfully.
Simply go to Immo>North America>Ford>China market>Choose by system>click on system Mode 1
Proceed to read password, click Add key once password read, completed successfully.
Follow instructions to add key after making flip key teeth and everything should be done under 5mn and no need to do for immo and remote system separately.

 Problem:

I was trying to add a new spare key to Bmw x1 2019 BDC with xhorse vvdi2 via OBD.

Now BDC has no communication, error SWFL Lost. Any solution?

Possible reason:

Failed to make sure proper voltage.

Solution:

Now you need to restore flash. You need to bench read flash and repair then write back to BDC.

Try to unlock on bench. Power supply stable at 13.5v. Try several times until flash writes ok.

Feedback:
Solved.  Flash with esys and removed bdc job on bench and done!

 Question:

I want to read engine ME9.7 ECU with xhorse vvdi key tool plus but the device does not show a wiring diagram. Where to find engine, gearbox and ISM wiring to key tool plus?

Here are some of the wiring diagram to key tool plus.

CR3.xx

CR4.xx

CR5

CR6

CR60.xx

CRD.11

CRD2.xx

ME9.7

MED17.7.x

7G Gearbox

ISM

SIM4LE

SIM4LKE

SIM266

SIM271DE2.0

SIM271KE2.0

Keep updating…

https://www.vvdishop.com/service/vvdi-key-tool-plus-benz-ecu-wiring-diagram.html

 Xhorse Dolphin XP005 and XP005L released new database version V127 on Oct. 18th. 2023.

There is an update for that blade fixed. This version fixed Renault VA2EH2 key cutting issue.

Feedback:

I had the issue last week with same blade.

After updating it to latest software it was all fixed.

FYI:

You can use universal key duplication option if you have a working key.

www.vvdishop.com

 How to read Audi A6 J518 ELV MCU 3L40K with xhorse vvdi key tool plus?

Select Prog->IMMO->Audi->J518(-2010)(1L59W/3L40K)

Check wiring diagram

Connect J518 module with vvdi key tool plus mcu cable following the wiring diagram

Read and save eeprom

Read and save Flash data

www.vvdishop.com

 Some users reported that Xhorse Dolphin XP005/XP005L had bugs when cutting VA2/VA6 key blanks in the last update.

The problem was solved by the last update. V1.7.4 came out and fix the va6 issue. 
Update the firmware to 1.7.4 or Dolphin machine and update also the Xhorse app.

Feedback:

Just cut a VA6 I decoded the key Q-H then cut as normal.
so I tried again with the same key but this time I noticed a new item in the menu just before you click cut (See Photo)

I ticked this and cut the key again (you have to tick it on both cuts)

Put it in the lock and it worked.
on the 2nd cut it took a fraction more off one side and the back end of the key

But it worked in the lock.

 Xhorse MVCI Pro J2534 was tested working with VW Audi Skoda Seat ODIS-S service software V23 and ODIS-E Engineer software V17.

Software version: ODIS-S V23.0.1/ ODIS-E V17.01

License: Included License Standalone and License for all brand

Compatible device: Xhorse MVCI Pro (and other passthru devices VXDIAG VCX SE 6154, openport 2, vnci 6154a, godiag j2534 etc)

Operating system: Win10 or later O/S, RAM>4G. Win7 is not supported since this version.

Language: Multi-language

Both software can be downloaded for free. But not include keygen.

If need activation, contact

Skype:VVDIfactory.com
Email:sales@VVDIShop.com
WHATSAPP:+86?13559259147

We will send software in U disk format which contains 1 time free activation for both ODIS-S and ODIS-E software.

Tested models by far:

Steps to Install ODIS-S/ODIS-E

1.Install Setup

2.Activate software

3. Install PostSetup

4. Install driver

5. Run software

MVCI Pro J2534 driver is included in the U disk.

www.vvdishop.com