Problem:
My xhorse vvdi mini key tool stopped working. Error BLE failed. Does anyone know why this happens?
Solution:
Update mini key tool via xhorse upgrade kit on PC.
If still the same, there is something wrong with your tool. You might need to send back for repair.
Will Xhorse vvdi key tool plus do a Dodge Ram proximity key 2018 and a jeep grand Cherokee 2022? Both have security gateway.
Yes, it will do. You also need a FCA 12+8 gateway bypass cable for 2018+ Chrysler vehicles.
Xhorse key tool plus supports the following Chrysler FCA models:
Chrysler:
Pacifica 2018-2020
300 2018-2020
300C 2018-2019
Town & Country 2018
Dodge:
RAM 2018-2021
Durango 2020-
Challenger 2018-2021
Journey 2018-2019
Charger 2018-2021
Jeep:
Grand Cherokee 2018-2020
Cherokee 2019-
Compass 2017-
Wrangler 2018-2020
Renegade 2018-2020
Gladiator 2020-
Commander 2018-
Select model and year, vvdi key tool plus will show you the programming procedure.
Here are examples:
Xhorse VVDI Key Tool Plus Program Jeep Wrangler 2020 All Keys Lost
Problem:
I failed to read VAG EDC17CP44 with Xhorse vvdi prog and bosch ecu adapter. Software gave an error 40 chip enter failed. What’s the problem?
Solution:
The error indicates your bosh ecu adapter is broken.
Buy a new one and try again.
https://www.vvdishop.com/wholesale/vvdi-prog-bosch-ecu-adapter-read-isn-without-opening.html
Problem:
Xhorse vvdi key tool max failed failed to clone 4D70 from a Kia Rio 2023, Calculate failed, error code 10102 any solution?
Solution:
If it is an older Kia/Hyundai, it might be network issue.
Need must strong network connection for all cloning tool for 70-80bit.
But if it is 2020 onwards models, xhorse vvdi cannot clone 4D70 on Hyundai and Kia from around 2020 even its written that cloneable.
You need to get pin number from 3rd party as 99% that programmer won’t be able to read pin. Buy pin code and add key by OBD.
Problem:
I can not update the firmware of the xhorse vvdi key tool plus. It does not detect update and do not know how to fix it?
Solution:
First check internet connection.
If it won’t help, do a factory reset – just save all old saved files on external device in case you will need it in the future.
How to Reset Xhorse VVDI Key Tool Plus to Factory Setting?
Problem:
I want to generate a xhorse universal remote to a DS4 using vvdi key tool max but failed, it says abnormal hardware 9A, what does it mean?
Solution:
Hardware 9A error means your remote is Chinese version.
Get a English version (global) universal remote or a Chinese version mini key tool.
If your Xhorse condor xc-mini plus ii key cutting machine is not working and makes loud noise, you may need to remove the shell and check if x, y or z axis is broken.
How to do Xhorse Condor II short circuit test?
Remove the circled screws and remove the device screen and back cover.
Remove the six screws on the side of the table and remove the shell.
Turn the motor to move the table to the outermost end.
Loosen this screw, do the X Y Z axis motor test and the Electrical conductivity measurement and cut a key.
https://www.vvdishop.com/service/xhorse-condor-ii-short-circuit-test.html
Problem:
My xhorse vvdi key tool plus will not pass the first agreement screen.
It also threw an error “Device no response’. Any solution?
Solution:
Clear cache.
Reset key tool plus to facroty setting.
How to Reset Xhorse VVDI Key Tool Plus to Factory Setting?
If still no luck after trying all above, there maybe something wrong with your device.
Need to send back to your dealer for repair.
Problem:
I turn on the xhorse dolphin xp005l key cutting machine and try to connect with WiFi, but it failed to search WiFi and said no available WiFi. Any suggestion?
Solution:
Remove dolphin ii screen and check if this black WiFi cable is well connected
Follow guide below to remove this part
How-to: unlock BMW CAS4 and add a newer shape key using xhorse vvdi2 key programmer.
Vehicle model example: Bmw F02 750 Li
Get it out of the car because the transmission is 6HP and need to unlock on bench.
(Before that when this CAS was connected to the car, it gave a warning and told that this car is having 6 hp transmission you should do it by a programmer or on the bench)
Device used:
BMW CAS4 test platform or godiag one
power supply
Procedure:
Connecting 12 volts power to the BMW CAS test platform and power switch is on
Run vvdi2 software->BMW software
Put working key and turn on ignition on
Press Connect to detect vehicle information
Software asks prepare dealer key and change km require unlock CAS4.
Press Unlock CAS4/CAS4+ function
Unlocking CAS4 module.
Unlock success you can make dealer key.
Get key info again.
VVDI2 says this unit no need programming.
Select prepare dealer key with programmer.
Record the following informations can be saved at your document
Insert working key into ignition
Then select an unused key position
Insert a new key
it has been learned successfully.
Take all of them out and try to turn the power completely.
Both keys will turn ignition on.
Everything is working and the car is running.
