I’m already having a FCC key and gonna do add key for this 2023 Toyota Camry. What I would consider the easiest way is using Xhorse VVDI Remotes. As I can program the key no problem without any codes in 4 minutes.

What is required

VVDI Key Tool Plus

XKTO10EN Toyota Wired Remote

VVDI Super Chip XT27A66

Step1. Generate Remote

Plug circuit board into VVDI Key Tool Plus. You can do this with a Mini Key Tool in same way. Be noted to install a battery for it.

Remote program >> Search: HYQ12BGF >> Generate

Step2. Add Remote

Disconnect the circuit board, enter

Immo programming >> Toyota >> Select from model >> Camry >> 2010- >> Remote program(2013-) >> Start programming >> Remote adding

Switch ignition on, open driver door at the same time.

Please complete in 30s, you’ll hear the system beep after done:

Click LOCK & UNLOCK button for 4s, then click LOCK button for 1s.

(If no programmed, click LOCK & UNLOCK for 4s, after releasing click UNLOCK & LOCK meanwhile).

Step3. Transponder Clone

Insert working key into Key Tool Plus coil.

Transponder Clone>> Read Transponder >> Transponder Clone >> Start clone

Take out working key and put a VVDI Super Chip instead.

Transponder copy successfully.

Easy done!

www.vvdishop.com

名前:
URL:
コメント:	上の画像に書かれている文字を入力して下さい
	＜ご注意＞ 書き込まれた内容は公開され、ブログの持ち主だけが削除できます。 確認せずに書込