By using with Xhorse VVDI MLB Tool, we can get the synchro, CS & Pin from the original key for backup. After successful MLB data collection and calculation, this data is available after the dealer key was generated. Detailed steps are as follows:

Step1. Identifiaction Key

Please place the key in the device identification area for identification.

Step2. Collect Key Data

Open the original car key, connect the original car key PCB as shown in the diagram, and click the collect key data button after connection. It will take about 3-4 minutes. The server takes approximately 10s to calculate. After the calculation is completed, please save the calculation results.

Step3. Make Dealer Key

Load the calculation data saved in the step2 and generate dealer keys. Then use VVDI2 or KEY TOOL PLUS for key learning.

Run VVDI2 software and select correspoding vehicle software, i.e Audi
Select Key Learn->MLB Immobilizer System.

Upload data read by MLB tool. Then you will get CS and PIN.

名前:
URL:
コメント:	上の画像に書かれている文字を入力して下さい
	＜ご注意＞ 書き込まれた内容は公開され、ブログの持ち主だけが削除できます。 確認せずに書込