Some users have no idea how to change BMW KM using the Xhorse VVDI BIMTool Pro programmer.

The instructions are in the user manual.

Support type: EWS1/EWS2 EWS3, EWS4, CAS1, CAS2, CAS3, CAS3+, CAS4(0L15Y), CAS4 (5M48H). CAS3+ encrypt version select CAS3+ type.

Change KM for EWS/CAS: Load EEPROM dump, input new KM value, press button “Change KM” and save new EEPROM dump then write back it to EEPROM.

VVDI BMW Tool CAS1/CAS2/CAS3/CAS3+ change KM steps:

1) Record the KM information displayed in instrument, take instrument away from the avoid synchronize KM with CAS automatically

2) Set CAS KM to 0 (you can do this via OBD or EEPROM dump, select correct CAS version)

3) Read instrument EEPROM dump by programmer (VVDI Prog or Multi Prog) then save EEPROM dump you read,usually it use M35080 chip

4) Select File Change KM ->M35080 (Instrument) and load EEPROM dump saved instep 3

Attention: this type instrument has 2 algorithms for KM, Algorithm 1 and Algorithm 2， you need try different algorithm to check the Old KM in file value, which one is nearby the KM (write in step 1)), which is the right type. Change new KM with the right type5) Input new KM

6) Press button “Change KM” and save new EEPROM dump

7) Write new EEPROM dump to M35080 chip

8) Put your instrument in car

9) Finished.

F-Series(CAS4 system) change KM steps:

1) Record the KM information displayed in instrument, take instrument away from caravoid synchronize KM with CAS automatically

2) Set CAS KM to 0km (Change KM with File Change KM, select type accord chip mask,support 1L15Ymask and 5M48H mask)

3) Read instrument EEPROM dump by programmer

4) Select File Change KM ->F-Series Instrument and load EEPROM dump which savedin step 3)

5) Input new KM

6) Press button “Change KM” and save new EEPROM dump

7) Write new EEPROM dump to instrument

8) Put your instrument in car

9) Finished.

名前:
URL:
コメント:	上の画像に書かれている文字を入力して下さい
	＜ご注意＞ 書き込まれた内容は公開され、ブログの持ち主だけが削除できます。 確認せずに書込