VVDISHOP.COM here provides Xhorse MVCI Pro J2534 cable software for free.

Including Ford, Honda, Mazda, Nissan, Peugeot, Toyota, Volvo, VAG, Subaru and Renault software.

Operating system: Windows 7, Windows 10 and Windows 11

MVCI Pro driver current software version V2.1.8

Firmware version V1.3.3

Make sure update driver to latest version.

Free Download MVCI Pro J2534 Software

VAG ODIS 9.1.0 Software

Ford Mazda Honda Toyota Nissan PSA Volvo software

Software version:

1.ODIS service: 9.1.0

2. Ford IDS V121

1). Install IDS-121.01_full.exe
2). Install VCI_Software_1.0.0.10.exe
3). Install VCI Manager 20.11.24.exe

4). Install Ford driver in mvci pro manager
5). Run IDS_Path.exe

3. Honda HDS 3.102

4. Mazda IDS V121

1). Install MazdaIDS-121.00.exe

2). Install VCI Manager 20.11.24.exe

5. Nissan Consult 3 Plus v237

6. Toyota Techstream 12.00.127
1). run GTS_12.00.127_TME_NDSI.exe
2). MainMenu.exe replace to installation directory
3). key.txt register

7. Volvo VIDA 2014D

8. Peugeot Citroen PSA Diagbox 9.85 (require activation, key is in the notepad)

9. Renault CLIP V219 (require activation)
1), Run Install Fix
2), Install CLIP
3), Install Bosch Driver (RNM+VI+V20.2+v9.0.912.220+Setup.exe)
4), Install VCI Driver (RENAULT VCI Driver 1.8.9.0601.exe)
5), Registration CLIP

www.vvdishop.com

 Question:

Failed to read BMW N20 ISN code with vvdi bimtool pro.

Something is wrong with bimtool pro. How to send data log?

How to Send Xhorse VVDI BIMTool Pro Log Data?

Go to Options tab->Open log files.

Send corresponding log data to Xhorse engineer to analyze your problem.

 Xhorse MVCI pro j2534 passthru cable update new driver version 1.3.3. Adding more drivers for different car brands.

Software version:  V2.1.8

Firmware version: 1.3.3

Download MVCI Pro driver software

First update software version, after upgrading the software version, you need to uninstall and reinstall the driver again.

MVCI Pro now is compatible with following software

VAG ODIS

Honda HDS

Ford IDS

Mazda IDS

Toyota techstream

Subaru SSM3 (does not support SSM4)

JLR SDD

Volvo VIDA

GM DPS

Renault CLIP

Peugeot Citroen Diagbox

NOTE:

Software is not included. Need to find software by yourself.

 2020 Audi Q8 Add Key with Xhorse VVDI MLB Tool and VVDI2 successfully!

Calculate and generate key data with MLB Tool, then learn key with vvdi2.

You have to remove capacitors.

On xhorse need only desolder 2 x capcitors. Nothing big work. On KYDZ you also need desolder capacitors.

Both tools require capacitors to be removed, the “solder less” adapters are only for the three wires you connect at the end which is the easiest part of the process.

The key cover shell is sealed, better to change shell.

Photo attached:

 Problem:

Brand new xhorse vvdi key tool max pro just going through the set up. Been stuck on this screen for 20 mins. Any suggestions?

Solution:

Network issue.

Get a faster internet connection or use WiFi hotspot.

Or turn it off, and downloaded again. It works out just fine.

User feedback:

Just had to turn it off and try again. It worked.