Certainly yes. Xhorse VVDI Key Tool Plus Pad is able to read & save VW Skoda Seat VDO NEC+24C32 while OBDSTAR is not communicating. It happened today when I was trying to read the cluster with a working key. By reading with Login Method 3, Xhorse succeed.

How to read NEC+24C32 via VVDI Key Tool Plus?

Immo programming >> VW >> Select by type >> 4th immo system – Volkswagen >> Skoda >> Seat >> Instrument with NEC+24C32 >> Read EEPROM

Xhorse gives us 3 options: Login Method 1-3:

1. Please select the login method, you can choose “Login Method 1” to log in when you are unknown. If the ignition key is inserted or when use the all-key-lost mode, there is the prompt to insert the ignition key, then you can select “Login Method 2” to try, models after 2013 use “Login Method 3”.
2. If a login method causes the instrument to black out or the car can not be started, just power off the car battery then power on again.
3. Please click start button once for the smart key before login.

If I selected Login Method 2, it’ll be the same failure as OBDSTAR.

But if I selected Login Method 3, Xhorse Key Tool Plus can read it successfully. And even I can save the data as well.

In the same way, I can also read & save IMMO data with Login Method 3 successfully.

Everything has read right out of that cluster.

www.vvdishop.com

名前:
URL:
コメント:	上の画像に書かれている文字を入力して下さい
	＜ご注意＞ 書き込まれた内容は公開され、ブログの持ち主だけが削除できます。 確認せずに書込