How to use Xhorse DolphinXP005 to Cut HU66 Plastic Key?
Question: How do I copy HU66 B6 Plastic original and plastic new. I have only Xhorse Dolphin XP005. I don’t want to break the copier when I read the original key.
Answer: Super easy to decode by eye. Decode by eye or use a calliper to make the measurements.
Decode by eye input number put the metal blade in and wen its about to cut pause and swap metal blade out then put plastic blade in and continue.
There is an option for plastic key on the xhorse app.
Tick Plastic Key option
Decode by eye input number put the metal blade in and wen its about to cut pause and swap metal blade out then put plastic blade in and continue.
There is an option for plastic key on the xhorse app.
Tick Plastic Key option
or get the xhorse key reader and it is excellent on wore out keys to decode.
Xhorse Dolphin XP-005/XP005L cutting plastic key HU66 instruction:
Example: cutting of a Skoda plastic key with a 2.5 mm milling cutter
In Xhorse app, go to Vehicle database- Skoda- Fabia- HU66
Align M2 clamp
Align M2 clamp
Place side A of the plastic key
input bitting
press Cutting key
tick Plastic key/Aluminum key cutting
input bitting
press Cutting key
tick Plastic key/Aluminum key cutting
Cutting key in the process
Cut side A success.
Align M2 clamp
Place side A of the plastic key
input bitting
press Cutting key
tick Plastic key/Aluminum key cutting
input bitting
press Cutting key
tick Plastic key/Aluminum key cutting
Cutting key completed.
Test the new key.
Technical support from www.vvdishop.com
