Problem:

One of our customers reported that his Xhorse VVDI Key Tool Plus has no response, press any function button always show the same error “No Device Language List”.

Press Setting icon, still the same. Don’t allow to change language setting.

Solution:

Swipe up on the screen, exit the app, and try again.

Feedback:

Yes, it is working.

www.vvdishop.com

 Problem:

One of our customers tried to add a spare key to Audi Q7 2020 with the Xhorse VVDI MLB Tool. However the tool failed to collect key data.

Error “Key data calculation failed”.

Common Issues with Collection Failures

• VCC1 and VCC2 are reversed.
• The capacitors were removed incorrectly or not removed.
• Short circuit in soldering.
• Data collection requires wireless reading of the key simultaneously; if the key is not positioned correctly, it will not be detected.

Check the above and collect key data again.

 How to Check Xhorse Dolphin XP005/XP005L Battery Information?

In Xhorse App, go to Device Information->Key Cutting-> Power->Check battery information

Need to connect dolphin with Xhorse App to read battery information.

If it is XP005L, you can check battery information on the App or in the device (go to Battery information).

If the battery cannot charge or has other problems, do following:

1. Take a video of power on and off and send to us

2. Send a screenshot of battery information

3. If cannot read battery information, follow this way to test battery voltage and send test results to us.

The Xhorse engineer will check if battery needs replacement.

https://www.vvdishop.com/service/replace-xhorse-dolphin-xp005-battery.html

 Xhorse VVDI2 how to change resolution?

Right click the program shortcut, then go to “Compatibility” tab, then “Change high DPI settings”, once on that box, play with this option until it renders it how you like it:

www.vvdishop.com

 Problem:

Failed to update xhorse vvdi mini key tool firmware via app and via upgrade kit on PC.

When update firmware via app, it reported error “Erase the internal chip 1 fail”.

Here is the VVDISHOP engineer solution:

1. Turn off device.
2. There is a small hole on the back of the device case. There is a button inside, press the button with a toothpick, then hold the power button.

3. Turn on device, then try to update firmware again, it should be fine.

 Xhorse Multi-Prog read and write Renesas V850 EPS (Electric Power Steering) module on a Land rover Range Rover Sport.

Processor: Renesas D70F3485

Using wiring diagram pinout (Land rover Evoque/Benz W166 EPS D70F3483/3485)

You can repair or replace a new EPS module.

Read Dflash and Pflash.

Then write Dflash and Pflash.

www.vvdishop.com