Xhorse VVDI Key Tool Max Pro free update TPMS function on June 7th, 2023.

How to Update TPMS function to Xhorse Key Tool Max Pro?

1). Run KeyTool Max Pro->Update, update App to 2.0.2 or above version.

2). Select TPMS function, it app says no database. Go to Update center, download TPMS software.

TPMS function is ready to use.

Key Tool Max Pro TPMS Functions:

• Support XTPMS programming, up to 20 sensors simultaneously
• Reprogram XTPMS sensor
• Activate original TPMS and XTPMS sensor (315Mhz, 433Mhz)
• Copy and change sensor ID
• Read TPMS data like tire pressure, temperature, battery, etc.
• Support OBD reading, writing, read & clear DTCs
• Compatible with multiple car models, more models coming soon

Xhorse universal TPMS sensor (XTPMS Sensor coming soon)

TPMS (Tire Pressure Monitor Sensor) Function menu display:

www.vvdishop.com

 As titled, we have customers asking if xhorse vvdi key tool plus copy MQB48 Transponder.

The answer is No. key tool plus will not copy MQB48 transponder.

Only generate (MQB48 XT1M transponder or MQB remote).

 Problem:

I am having an issue with the xhorse mini key tool. I was updating it (firmware) via upgrade kit and the battery died.  Now I keep getting fails trying to complete update and tool is stuck on ‘USB —PC’.  It says SAFE1 also when I turn it on.

Solution:

Firmware upgrade should be done via Upgrade kit.

If key tool battery is low or the internet is unstable, you will fail to update firmware.

Charge keytool and change network, try several times.

If all failed, there is something wrong with the mini key tool. Send back to your dealer for repair.

www.vvdishop.com

 Following I’m gonna show how to add a smart key for 2017 Nisscan Versa with Xhorse VVDI Key Tool Plus Pad by OBD. This is a working key and a new key. Before programming, you’ll have to read out the BCM codes.

Read BCM Code

Immo programming >> Asia >> Nissan >> Select from system >> Smart >> 4 digits PIN >> Type 5(no slot – button type) >> Start programming >> Read BCM code

Switch ignition on! Click “OK”.

Body computer number(BCM number) has been read out.

Use the “5-digit BCM code calculation password” function to get the password to match(This function requires online)!

Perform calculate of PIN codes by online?

Note:

1. This function requires online network computing.
2. Please keep the network unblocked.

Click “Yes”.

The BCM code and passwords were read out.

Just take a photo to record.

Program New Key

Program smart key >> Input password

Take all smart key out of the car and click the start button once, turn on the security light(double flash lights).

To match the smart card, the direction lock must be released first(the program is released)

Yes: Automatically release the direction lock and execute the matching function.

No: Directly execute the matching function(used when the direction lock has been released by the program).

Click “No”.

Please follow the step below to complete the matching operation:

1. Paste the back of the smart key to be matched to the start button, press START button, wait for the immo light to go off, then turn off the ignition switch.
2. If you add more keys, please repeat step1 & step3. stick the back of the matched smart keys to the start button, and turn off the ignition after starting the car.
3. If the direction lock does not reset, try to press the start button several times to open and close the driver’s door until the direction lock is reset.

After the matching is completed, verify the key as follows:

Open the door once, press the remote UNLOCK and LOCK button once, start the engine and wait for 5s.

Complete.

This is using VVDI Key Tool Plus to add 2017 Nisscan Versa key successfully.

www.vvdishop.com

 New user test report: 2017 land Rover evoque add second key successfully with xhorse vvdi key tool plus via OBD.

Key tool plus successful.
Changable I’D key ok.
Use existing key slot (Clone existing slot).
Acdp failed (error key id). I use ACDP normally with editable ID keys never had any issues but it didn’t like this changable ID key today.
Autel failed ( software not supported ).

key tool was straight in and out easy in 4 minutes 20 seconds which did surprise me.