How-to: add a key to a BMW GS 850 motorcycle using the XHORSE VVDI KEY TOOL PLUS with the new BMW motorcycle software and XM38 BMW smart key.

Tools required:

Xhorse vvdi key tool plus (or vvdi2)

Xhorse XM38 BMW Motor key

BMW Motorcycle key learning license

Original motorcycle key

1. Generate BMW XM38 remote

Put XM38 remote into key tool plus
Go to Remote Program->BMW motorcycles->All remote->BMW Bike 8A Smart Key 434.42 Mhz
Generate remote

2. Program XM38 BMW motor smart key

Go to Immo programming->BMW->Select from system->BMW motorcycle key learning->Key function, Start programming

We have to remove and place the battery stabilizer 12V

Put the key by the induction coil and turn on the ignition switch
Read vehicle information
You can see the key need to unlock, so it need pre-process that means we need to unlock the unit

Let’s Delete key information
insert the key into the ignition switch ot close to the emergency start position
This key number 1 is acceptable, the frequency is right, chip is locked.

You can go to special functions->File management ->Local File to see if file is saved successfully.
Then unlock the unit.

Unlock X_SLZ/X_EWS
Read instructions. Do not touch any button on the vehicle during the programming process
make sure vehicle must have a power supply 12v.
if the programming is interrupted due to vehicle volatge or other reasns, try to continue programming first, if programming cannot continue, use the programmer to write normal FLASH before programming.

make sure internet is also stable.
unlock completed.
Write coding
Now it has the complete coding.

Read the key information one more time.
Then the unit is unlocked.
Before continue, we disconnect the unit and try to start the engine
We have a new key and let’s continue the process
connect the vvdi key tool plus OBD
The key is still in the induction coil.
put new XM38 key into key tool plus, delete key information
It is locked, it is a brand new keyless go key

Done.

www.vvdishop.com

 Tips to activate VAG MQB48 license to Xhorse VVDI2 and Key Tool Plus programmer.

1.If you have vvdi2, make sure your vvdi2 is full version. Only the full version allows MQB license to be activated on the machine.

If you are not sure if your vvdi2 is full version or not, provide serial number to us.

2. Make sure your vvdi2 and key tool plus have registered to your xhorse app account, otherwise, MQB license can not be activated.

You download the Xhorse app, register and log in with phone number.

Then bind your vvdi2 or KTP to your account.

Again if not sure if your device is registered or not, provide serial number to us to check.

How to install new Xhorse App and Register Account step-by-step?

3. Purchase MQB license here and leave your device serial number.

https://www.vvdishop.com/wholesale/xhorse-mqb-software-license.html

vvdishop.com engineer will activate MQB license within 24 hours.

How to read MQB immo data and program key?

Xhorse VVDI Prog+ VVDI2 Program VAG MQB48 Key (VDO or JCI)

 Xhorse released another crazy innovation-learning motorcycle keys through an OBD diagnostic socket on Jan. 2023. 

2 Major Updates:

Supports learning smart keys with xm38 motorcycle smart key

Supports chip immobilizer keys 4d+ (80 bit) transponder type required for use vvdi super transponder

Xhorse BMW Motor License Functions:

• unlock ews
• upgade original file
• read security key
• obd add key 
• read key information
• read coding
• erase key
• restore coding

Compatible Xhorse tools:

• VVDI2
• VVDI Key Tool Plus

Vehicle List:
C400GT
R1200
R1200R
K1600B
K1600GA
K1600GTL
F750
F850
R1250
C400X
C650GT
F750GS
K1600
K1300
C600
F800
K19

 This is guide you how to decode the PIN code from comfort module EEPROM dump with Xhorse VVDI Key Tool Max PRO. It’s also another easy way to clone ID48 chip by a working key.

Following I’ll decode the VW Passat B6/CC ID48 95320 PIN code as example.

1. Visit http://i.xhorse.com to upload eeprom file.

2. Down eeprom file on VVDI Key Tool Max PRO: Immo data tool >> File management >> My data >> Download

3. Immo data tool >> Europe >> VW >> Passat >> Comfort ID48 – 95320 >> Start execution >> Load eeprom file

Trying to decrypt dump buffer, please wait…

Load file success.

PIN code has been successfully decoded: 41030

Now we can go on to make dealer key.