Toyota Corolla 2015 8A flip key all keys lost is done by xhorse vvdi key tool plus.

Procedure:

Follow wiring diagram to connect 8A AKL adapter with immo box and key tool plus

In vvdi key tool plus, select mmo Programming->Asia->Toyota-> Select by type->IMMO system->8A immo box all keys lost (flip key)-Start programming

Select 8A immo box all keys lost- OBD make master key

Sync data with server. Don’t insert key during the process. Keep the ignition switch off.

Calculate immo box successfully and save data.

Put a VVDI super chip into key tool plus, prepare to make master key which can start car directly

Write key in progress

Program 8A flip key successfully.

Disconnect 8A AKL adapter, install super chip into key shell. Test the new key.

www.vvdishop.com

 How to clone Mercedes C220 W204 front SAM module using xhorse vvdi prog?

Mercedes W204 front SAM module pinout to vvdi rpog

Follow wiring diagram to connect SAM module with vvdiprog

Read SAM module data

Select 8-Other->Benz->W204 Front SAM Module

Save data.

Connect a new front SAM module with vvdi prog programmer

Write data to new SAM module

www.vvdishop.com

 Xhorse vvdi prog can read and write cluster visteon ford fiesta 2006 MC9S12H256 1k78x mcu but does not have wiring diagrams.

Here is the pinout shared by one of vvdi prog users.

Free for all

In vvdi prog software, select MCU->MC9S12H256 secured

Read and write ok

 How to get ISN from a BMW F series DME MEVD17.2.9 with Xhorse VVDI Key Tool Plus Pad? Utilizing the Bosch ECU BMW N20 Adapter, this is easy and time-saving. The ECU ISN can be read via D-Flash file.

Read D-Flash & P-Flash

Insert the XDNP37 adapter into ECU slot, make sure that’s flush and everything is connected. Since we’re going to use the Bosch adapter, let’s go

Prog >> Read ECU with CAN >> BMW >> MEVD17.2.9_Fxx(N20)

Here we can check the detailed connection diagram.

Read >> DFLASH >> Begin

It will start reading calculation…

At this point, leave it and do not move Xhorse Key Tool Plus tablet.

Read successfully.

Save DFLASH data file.

Now we’ve got the VIN number here.

Go back to read PFLASH.

Read >>PFLASH >> Begin

This will take longer time than DFLASH.

Read successfully.

Save PFLASH data file.

Read ECU ISN

Now, we can go to read the ISN.

Immo programming >> Europe >> BMW >> Select from system >> ECU ISN >> Start programming >> MEVD172Y/MEVD172/MEVD1725/B38/B48/X63TU- F Series >> Get ISN from file >> DFLASH

As you can see, this is the ECU ISN.

It has been successfully read out.

If you load the PFLASH, it says: “This file is not supported by current module!”

So remember to choose D-Flash, that’s the ISN right there.

For me with magic, VVDI Key Tool Plus Pad can read the internal Flash and internal eeprom really fast. But the good thing about this tool is that everything is done built inside. Once you’re done reading, the file you can just transfer it or read it from the tool device itself. That makes a job extremely easy.

https://www.vvdishop.com/service/vvdi-key-tool-plus-read-bmw-mevd-17-2-9-isn-with-n20-adapter.html

 Can Xhorse VVDI BIMTool Pro read ISN from ECU DDE (diesel ECU)?

Yes, the BIMTool pro can directly read the ECU ISN, and support the following types in picture below.

EDC17C45

EDC17C56

EDC17C50 (Fxx)

EDC17CP49

MEVD17.2.3 (B38)

MEVD17.2.K (B38)

MEVD17.2.4 (Exx N20)

MEVD17.2.4 (Fxx N20)

MEVD17.2.5

MEVD17.2.6 (N55)

MEVD17.2.8

MEVD17.2.9 (Exx N20)

MEVD17.2.9 (Fxx N20)

MEVD17.2.H

MEVD17.2.P (Fxx N20)

MEVD17.2.G (N55)

MEVD17.2.G (Fxx N55)

Select the correct type, connect as connection diagram, and click “Read ISN” to read it. If you can’t read it, you can click “Upgrade ECU Adapter”. If the adapter can be upgraded means it is normal, check whether the connection and option are correct, and try to read repeatedly.

Here is an example

 How to bind this Xhorse Toyota XD8ASKGL 8A AKL Adapter to the VVDI Key Tool Plus?

Check the instructions below.

Go to Immo Programming->Aisa->Toyota-> Select by type->All smart remotes lost->8A 2016- P4 Page A8/A9/AA->Start Programming

Select Device Binding Adapter function

Follow diagram to connect XD8ASKGL 8A AKL adapter with key tool plus and vehicle.
Press OK to combine.

Xhorse Key tool plus has been combined with the adapter.

Now you can backup smart box immo data and program proximity key.

https://www.vvdishop.com/service/combine-xhorse-xd8askgl-8a-akl-adapter-with-vvdi-key-tool-plus.html

 Xhorse VVDI Prog programmer software was released to V5.2.4 on Feb. 1st, 2023.

VVDIPROG v5.2.4 (2023-02-01)
* This version DON’t need update firmware
+ Add YingJie 500 315,
ZhuHong 500 315
options in
<8-OTHER>-><SANY>
+ Add ROEWE EPS(D70F3506)
option in
<8-OTHER>-><SAICMOTOR>
+ Add Telsa battery(MM9Z1J638)
option in
<8-OTHER>-><Tesla>
+ Add HOWO A7,
HOWO SITRAK 2083,
HOWO T5,
HOWO T5H,
HOWO T7H,
HOWO TX,
Sino Trunk2083,
SITRAK 6011,
SITRAK 6021,
SITRAK C5H SQUARE REMOTE,
SITRAK C7H,
SITRAK C7H B5,
SITRAK RHOMBUS REMOTE,
SITRAK T7H
options in
<8-OTHER>-><Sino Trunk>

Free download vvdi prog v5.2.4

https://mega.nz/file/YdtTEK4S#AN-fkAuFVmB_uS40oy4rIufMEFIOVJmxI7-Wbkl7OL4