Xhorse Multi Prog programmer released new software version 1.1.2.0 on Feb, 26th, 2024.

Database V11
2024-02-26 14:36:44
* MCU STM8S and STM8AF series wiring diagram update.
* MQB dashboard options process optimization and wiring diagram update.
* Repair NATS5-IMMO option in <IMMOBILIZER>-><NISSAN>
+ Add SPC582B50,
SPC582B54,
SPC582B60,
SPC584B60,
SPC584B64,
SPC584B70,
SPC584C70,
SPC584C74,
SPC584C80,
SPC584E84,
SPC584G80,
SPC584G84,
SPC584N80,
SPC58EC60,
SPC58EC70,
SPC58EC74,
SPC58EC80,
SPC58EE84,
SPC58EG80,
SPC58EG84,
SPC58EN80,
SPC58EN84,
SPC58NE84,
SPC58NG84,
SPC58NH92,
SPC58NN84
options in
<MCU>-><ST>-><SPC58XX>
+ Add MQB-LOCK(D70F3423)-READ(WELD),
MQB-LOCK(D70F3423)-WRITE(WELD)
MQB-LOCK(D70F3426)-READ(WELD),
MQB-LOCK(D70F3426)-WRITE(WELD)
MQB48/49/5C-LOCK(R7F701401)-READ,
MQB48/49/5C-LOCK(R7F701402)-READ,
MQB48/49/5C-LOCK(R7F701404)-READ,
MQB48/49/5C-LOCK(R7F701407)-READ options in <DASHBOARD>-><VOLKSWAGEN>-><MQB>
+ Add AUDI Q3 DASHBOARD(2018–)(D70F3426)-READ, AUDI Q3 DASHBOARD(2018–)(D70F3426)-WRITE options in <DASHBOARD>-><AUDI>
+ Add Q7 BCM2 J393(2016)(SPC5646C) option in <IMMOBILIZER>-><AUDI>
+ Add MOTO REPAIR-MC9S12XS256 option in <IMMOBILIZER>-><BMW>
+ Add PCX(MC9S12G64) option in <IMMOBILIZER>-><HONDA>-><PCX>
+ Add CRV(R7F701033)(WELD), XRV(D70F3634)(WELD), AVANCIER(R7F701033)(WELD), BREEZE(R7F701033)(WELD), VALEO MOTORCYCLE EPROM options in <IMMOBILIZER>-><HONDA>-><HONDA>
+ Add BCM(D70F3634)(WELD) option in <IMMOBILIZER>-><HONDA>-><Vezel>
+ Add GEELY AIRBAG(R7F701018) option in <AIRBAG>-><GEELY>
+ Add Lithium Battery(MC9S12XET256) option in <Other>-><BYD>
+ Add JIEFANG DRAGON_V BCM option in <Other>-><FAW>

Requires extra MQB RH850/V850 cable for Multi Prog (purchase separately).

Keep updating more RH850 types.

It will MQB RH850 dashboard only, cannot write. Read data and upload to vvdi2 or vvdi key tool plus to program key.

Combine multi-prog with vvdi2 or key tool plus will get free MQB license.

MQB48/49/5C R7F701401 dashboard pinout

MQB48/49/5C R7F701402 dashboard pinout

MQB48/49/5C R7F701404 dashboard pinout

MQB48/49/5C R7F701407 dashboard pinout

Update software online. Press Update Online tab to update software, firmware and database. 

www.vvdishop.com

 Xhorse has recently put out 4 sets of 2024 exclusive adapters for Xhorse Multi-Prog Programmer, which can read and write SOP44, TSOP48 flash chips or common 8-pin chip. With these adapters, engineers can accomplish data reading tasks more easily.

To get the professional adapters, please visit www.vvdishop.com

 Problem:

I need to program key for my Toyota RAV 4 2016, lost all keys using xhorse vvdi mini obd tool and 8A non-smart key adapter. But the app says the adapter was bound to other devices. Any solution?

Solution:

8A adapter can only be bound to 1 xhorse device (key tool max pro, vvdi2, key tool plus or vvdi mini obd tool).
Must use the adapter with the device already combined.

For example, if bind 8A control box adapter with vvdi2, you cannot use it with mini obd tool.

www.vvdishop.com

How-to: program 2017 Dodge Grand Caravan All keys lost using the Xhorse VVDI Mini OBD Tool and mobile phone via OBD.

Connect Mini obd tool with car via OBD connector

Run Xhorse app on mobile phone

Select IMMO Programming->Dodge->Select by area-> North America->Grand Caravan->2010-2020->Toothless rotary key

Read password (PIN code)

Select Add key
Insert key to be added and turn the ignition on
Enter pin code to proceed
Add key successfully by xhorse mini obd tool

Test the new key. It works.

Done.

www.vvdishop.com

 The benefit of combining Xhorse Multi Prog with VVDI Key Tool Plus:

Multiprog has built-in MQB48 NEC35XX license, if combine multi-prog with vvdi key tool plus, you don’t need to purchase MQB48 license on key tool plus.

Your key tool plus doesn’t need to activate MQB48 license, just load immo data read by multi prog and then program MQB48 key with key tool plus.

How to combine?

Combine multi prog and keytool plus into your xhorse account via serial number.

How to Bind Xhorse VVDI2/VVDI Prog/VVDI MB to Xhorse Account?

 Xhorse MVCI PRO J2534 Passthru Cable is designed for multi-vehicle and multi-protocol diagnostics, compatible with D-PDU and J2534 diagnostic standards.

It can meet mainstream automotive industry standards to support multiple automotive manufacturers like Audi, Lamborghini, Bentley, VW, Toyota, Honda, Ford, Subaru, Mazda, etc. Besides, it also supports CAN, CAN_PS, ISO15765…various communication protocols.

These original diagnostic software (ODIS, TIS, HDS, SSM4, Ford IDS, Mazda IDS) are currently compatible and more will be updated.

How to use Xhorse MVCI PRO?

Click “Connect” in MVCI PRO software – here we can view device info like firmware version number, serial number, etc.

Read Authorization – here we can read the device authorization status & available times.

Update Authorization – here we can update the latest authorization status & reset the available times.

Vehicle Diagnosis – here we can install the driver required for the corresponding brand so that the operation on the original diagnostic software is successful.

Upgrade – here we can upgrade software & firmware.

Xhorse MVCI PRO Replace VW VAS6154

For Volkswagen, Xhorse MVCI programming cable supports PDU protocol and can replace VAS6154. The detailed steps are as follows:

• Open the MVCI PRO software: Vehicle Diagnosis >> Volkswagen, uninstall the existing driver first and then install.
• Click “Yes” to install the 6154 mode, which is compatible with the PDU protocol.
• Click “No” to install the 5054 mode, which is compatible with the PassthruJ2534 protocol.
• Click “Yes” to finish the installation.

Xhorse MVCI PRO Diagnose HONDA

• Connect MVCI PRO J2534 cable between the vehicle module & computer.

• Run HONDA original diagnostic software to automatically read VIN number. If the VIN hasn’t automatically filled in, we’d better check whether the cable connection is successful. If the OBD voltage is detected, the signal light will be solid green.

• Click “Honda System”, here will provide a list of systems. We can perform diagnostics as needed.

Eg. Click “ONE-PUSH START >> KEYLESS ACCESS CONTROL Unit >> DTCs”, here will display the diagnostic trouble code & related description.

To clear DTCs. Click the 4th icon on the right, then press ENTER to clear codes.

Now the DTCs have been cleared.

So we can use the same method to diagnose other systems.

www.vvdishop.com

 2017 VW Jetta keyless NEC 24c64+MQB couldn’t read data with cluster in service mode by pogo pin with  Xhorse VVDI2, had to read eeprom and write eeprom in service mode back but after had to turn ignition on to write original file. Figured you can hotwire few fuses together to turn ignition on without key.

I did dealer key myself with data I read of a car, the key I used is Xhorse Mqb universal smart key, I’ve just put vw logo on it.

Make sure you buy one with marking XSMQB that S stands for smart
Easy Job!